Usage & Setup Steps (Via Remote Control)
Important Notice:
The manufacturer explicitly recommends that the entire installation and configuration process must be completed exclusively using the included remote control. Manual setup on the unit itself is not required or advised.
1. Press the 12H / 24H button to select your preferred time format (12-hour or 24-hour display).
2. Press the DST button to activate and ensure that automatic daylight saving time adjustments are enabled.
3. Press the TIME SET button to initiate the configuration process. Once pressed, the hour display digits will begin flashing to indicate entry into setup mode.
4. Use the ➕ or ➖ buttons to adjust the flashing value to the correct setting. Once the correct value is reached, press OK to confirm and proceed to the next setting.
5. Continue the setup process in the exact sequential order below:
Hour
Minute
Year
Month
Date
After each value is set, press OK to confirm and move to the next parameter.
6. After completing the final date entry, press OK once more to save all programmed settings and exit setup mode. The device will then operate with the newly configured time and date parameters.